Product Information
HAN: | BCS017A |
Category: | Capacitive level sensors with media contact |
Connection: | Connector, M12x1-Male, 4-pin |
Dimension: | Ø 12 x 60 mm |
Installation: | non-flush |
Range: | 0.5...8 mm |
Switching output: | Push-pull PNP normally closed (NC) / NPN normally open (NO) |
Switching frequency: | 100 Hz |
Housing material: | 1.4404 stainless steel |
Material sensing surface: | PEEK |
Operating voltage Ub: | 12...30 VDC |
Ambient temperature: | -10...80 °C |
Protection class: | IP67 |
Approval/Conformity: | CE, UKCA, cULus, WEEE |
Sensitivity: | Switching distance teachable |
Thread (A): | M12x1 |
Product Description
Typecode : BCS M12K4D2-GOM80G-S04G
Available in: 94 versions
Need to detect and monitor fill levels in containers, pipes, or tanks while in contact with the media? This is not a problem for our capacitive level sensors with media contact. These detect the fill level of granulated materials, powders, viscous, or liquid media, as well as bulk materials. They are suitable for a wide variety of applications, as they are available in a wide range of versions, including:cylindrical configurations, immersion probes, hole or flange mounting, and in pressure-rated versions are available with a wide variety of plug and cable variants. In addition, their diverse range of housing materials, such as stainless steel, PTFE, and PEEK, ensure the best possible chemical resistance.
- For fill level detection of plastic granules, grains, feed and wood pellets, oils, aqueous liquids, acids, lyes, conductive powders, etc.
- Large selection of configurations and housing materials as well as cost-effective versions
- Easy adjustment and setup, also via IO-Link
- Smart Level technology to compensate for adhesion, foam, and moisture
Downloads
Datasheet | Download PDF |
MTTF Certificate | PDF Download |
Disposal | PDF Download |
Declaration of Compliance | EU-Konformitätserklärung / EU Declaration of Conformity (All languages) |
Declaration of Compliance | UK-Konformitätserklärung / UK Declaration of Conformity (UKCA) (All languages) |
Installation/Assembly/Configuration manual | GRUNDLAGEN KAPAZITIVE (German) |
Installation/Assembly/Configuration manual | BASICS CAPACITIVE (English) |
Manual | BCS M12K4 (German, English) |
Short guide | BCS M12K4 (German, English) |
Product Brief | Kapazitive Sensoren in M12 mit IO-Link (German) |
Product Brief | M12 Capacitive Sensores with IO-Link (English) |
Product Brief | M12 电容式传感器 — 现已配备 IO-Link 接口 (Chinese) |
Product Brief | M12 Capacitive Sensores with IO-Link (English (US)) |
Product View | PDF Download |
Manufacturer according to GPSR
Balluff GmbH, Schurwaldstraße 9, 73765 Neuhausen a.d.F., Baden-Württemberg, Deutschland, balluff@balluff.de, https://www.balluff.com