Out of stock

Gemue 491 Edessa Pneumatically operated butterfly valve (88389422)

SKU: GEM.88389422

2.261,00 €

incl. 19% VAT plus

Net: 1.900,00 €

Manufacturer information:

GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6–8
Baden-Württemberg
Ingelfingen, Deutschland, 74653
info@gemue.de
https://www.gemu-group.com/

Notify me when available

Currently out of stock

The Gemue 491 Edessa PTFE lined butterfly valve has a metal actuator and is pneumatically operated. The "Normally Closed", "Normally Open" and "Double Acting" control functions are available. Disc and shaft are one piece, body and liner are available in different designs. The butterfly valve is available in nominal sizes DN 25 to 600 and in standard installation lengths ISO 5752/20 | EN 558-1/20 | API 609 category A (DIN 3202 K1) in wafer and lug body versions. More product details

Description
Notify me when this item is available

Product Information

HAN:	88389422
Category:	GEMÜ 491 Edessa Pneumatically operated butterfly valve
Operating pressure:	10 bar
Type:	Butterfly valve, pneumatically operated Edessa
DN:	DN 125
Gehäuseform:	Flange-mounted version (Lug), length FTF EN 558 series 20
Connection type:	PN 16 / flange EN 1092, face-to-face dimension FTF EN 558 series 20
Body material:	1.4408
Control function:	Ra ≤ 0.8 µm (30 µin.) for media wetted surfaces, in accordance with DIN 11866 H3, mechanically polished internal
Actuator version:	Actuator, pneumatic, double acting, clockwise rotation, ADA0130U F05/07S17S14
Seat (liner):	PTFE/silicone FDA approval
Disc/shaft material:	1.4469, DUPLEX, steel, for DN 40 - DN 200 (disc/shaft), 1.4404 / 316L, stainless steel, for DN 250 - DN 1200 (disc), 1.4462, DUPLEX, steel, for DN 250 - DN 1200 (shaft)
Actuator particulars:	Anodized aluminium

Product Description

491125L233SPS3 BU13AC0 / 88389422

Description

Features

Suitable for chemically corrosive media
High-quality selection of materials can be combined in different ways
High level of plant reliability thanks to one-piece shaft and spring-washer-supported seal system
Long service life thanks to shaft bearings and special disc and liner geometry
Optional accessories are installed, set and tested so they are ready for operation

Technical specifications

Media temperature:	-20 to 200 °C
Media temperature:	-20 to 200 °C
Ambient temperature:	-20 to 95 °C
Operating pressure :	0 to 10 bar
Nominal sizes:	DN 25 to 600
Body configurations:	Lug \| Wafer
Connection standards:	AS \| ASME \| DIN \| EN \| ISO \| JIS
Body materials:	1.4404, block material \| EN-GJS-400-18-LT, SG iron material \| S355J2 + N, cast steel material \| VE Duroplast, reinforced
Body coating:	Epoxy
Liner materials:	PTFE / silicone \| PTFE TFM™/EPDM \| PTFE TFM™/FKM \| PTFE TFM™/silicone \| PTFE/EPDM \| PTFE/FKM
Disc materials:	1.4404 (316L), forged material \| 1.4469, Duplex cast steel material \| 2.4602 (alloy 22), block material \| 3.7035, titan
Disc coating:	PFA
Conformities:	ATEX \| EAC \| FDA \| Functional safety \| TA Luft (German Clean Air Act) \| USP

Contact data

E-Mail*

Manufacturer according to GPSR
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG, Fritz-Müller-Straße 6–8, 74653 Ingelfingen, Baden-Württemberg, Deutschland, info@gemue.de, https://www.gemu-group.com/