Complete pump set for highly aggressive acids and alkalis
Universal motor JP-380: 825 watts, 230 V, 50 Hz, protection class IP 55, 5 m. Cable with Schuko plug, double insulated, protection class I, externally ventilated motor, on/off switch, with no-voltage release and overload protection.
Pump mechanism made of PVDF, outside diameter: 41 mm, HC shaft,
Connection thread G 1¼", hose connection 1" (NW 25)
The barrel pump set contains:
- 2 m multi-purpose chemical hose 1" (NW 25)
- 2 pcs. hose clamps made of stainless steel
- 1 nozzle made of PVDF 1" (NW 25)
- Flow rate: 112 l/min (rotor)
- Head: 16 m (rotor)
- Viscosity: 1000 mPas
- Density: 1.9
Please select the appropriate dip tube length: 1000 mm (suitable for 200 liter drum), 1200 mm (suitable for IBC)
The pump must not be used to convey flammable media or in an explosive environment!
Complete pump set suitable for highly aggressive liquids. Before use, please check whether the pump material is resistant to the liquid to be pumped.
Liquid examples:
- Hydrobromic acid
- Chloric acid
- chromic acid
- Hydrofluoric acid
- Sulphuric acid (diluted)
- Nitric acid
- Formic acid (diluted)
- Sodium hypochlorite
- malic acid
- butyric acid, aqueous
- Tannic acid (tannin)
- Glycolic Acid
- urea
- Potassium iodide, aqueous
- Potassium permanganate
- Maleic acid, aqueous
- lactic acid
- Phosphoric acid
- picric acid
- Oxalic acid, aqueous (saturated)
The material used in the pump tube (PVDF) is not resistant to hot solvents. In addition, in the case of strongly alkaline solutions or ketones, the resistance is limited and must be checked.
The liquids listed are just a list of suitable application examples based on known resistances to the pump materials used. This does not give rise to any warranty claims.
