UR12.P50-GP2C.7BF Ultrasonic proximity sensors (11704836)

Baumer

UR12.P50-GP2C.7BF Ultrasonic proximity sensors (11704836)

Name: UR12.P50-GP2C.7BF Ultrasonic proximity sensors (11704836)
Brand: Baumer
SKU: BAU.11704836
Price: 245.50 EUR
Availability: InStock

Codice articolo: BAU.11704836

245,50 €

compr. 19% IVA più

Netto: 206,30 €

Herstellerinformationen:

Baumer GmbH
Pfingstweide 28
Hessen
Friedberg, Deutschland, 61169
info@baumer.com
https://www.baumer.com

disponibilità immediata

Ultrasonic proximity sensors

Fastest limit value detection due to extremely short response times
Acquisition of two independent limit values
Flexible parameterization and additional diagnostic data thanks to IO-Link
Shortest blind zone in its class
High performance in compact housing

Descrizione

HAN:	11704836
Categoria:	Sensori a ultrasuoni miniaturizzati
Version:	IO-Link dual channel Multiplex version
Repeat accuracy:	< 0,5 mm
Resolution:	< 0,3 mm
Power on indication:	LED green
Special type:	2 point proximity switch
Light indicator:	LED yellow
Output indicator:	Yellow LED / red LED
Temperature drift:	> 50 mm < 2 % of distance to target Sde < 50 mm ± 1 mm
Adjustment:	line-Teach, IO-Link
Scanning range Sd:	15 … 500 mm
Scanning range close limit Sdc:	15 … 500 mm
Scanning range far limit Sde:	15 … 500 mm
Hysteresis typ.:	4 % Sde
Power-up drift:	Compensated after 15 min.
Response time ton/toff min:	< 16 ms
Response time ton/toff standard:	< 40 ms
Sonic frequency:	290 kHz
Alignment measuring axis:	< 2°

no description available

Dati tecnici

Dati generali
Special type	2 point proximity switch
Scanning range Sd	15 … 500 mm
Scanning range close limit Sdc	15 … 500 mm
Scanning range far limit Sde	15 … 500 mm
Version	IO-Link dual channel Multiplex version
Hysteresis typ.	4 % Sde
Repeat accuracy	< 0,5 mm
Temperature drift	> 50 mm < 2 % of distance to target Sde < 50 mm ± 1 mm
Power-up drift	Compensated after 15 min.
Response time ton/toff min	< 16 ms
Response time ton/toff standard	< 40 ms
Sonic frequency	290 kHz
Adjustment	line-Teach, IO-Link
Output indicator	Yellow LED / red LED
Light indicator	LED yellow
Power on indication	LED green
Alignment measuring axis	< 2°
Resolution	< 0,3 mm
Dati elettrici
Tensione di alimentazione +Vs	12 … 30 VDC
Corrente assorbita media	35 mA
Circuito di uscita	Push-pull
Output current	100 mA
Caduta di tensione Vd	<3 VDC
Residual ripple	< 10 % Vs
Protezione da cortocircuito	Si
Protezione dall'inversione di polarità	Yes, Vs to GND

Interface	IO-Link V1.1
Baud rate	38.4 kBaud (COM 2)
Cycle time	≥ 8 ms
Process data length	48 Bit
Process data structure	Bit 0 = SSC1 (distance) Bit 1 = SSC2 (distance) Bit 2 = quality Bit 3 = alarm Bit 5 = SSC4 (counter) Bit 8-15 = scale factor Bit 16-47 = 32 Bit measurement
IO-Link port type	Class A
Additional data	Distance Excess gain Operating cycles Operating hours Boot cycles Tensione di funzionamento Device temperature Histograms
Adjustable parameters	Time filters LED status indicators Output logic Output circuit Counter Beam forming Deactivate the sensor element Find Me function
IO-Link	Si
Dati meccanici
Design	Cylindrical threaded
Housing material	Brass nickel plated
Width / diameter	12 mm
Height / length	50 mm
Connection types	Connector M12 5 pin
Tightening torque max.	15 Nm (Front: 10 Nm)
Condizioni ambientali
Temperatura d'esercizio	-25 … +65 °C
Storage temperature	-40 … +75 °C
Tipo di protezione	IP 67

Baumer GmbH, Pfingstweide 28, 61169 Friedberg, Hessen, Deutschland, info@baumer.com, https://www.baumer.com