| Processor data |
| Processor configuration |
|
| GPU data |
|
| CPU data |
|
| AI data |
|
| Memory RAM |
|
| Memory Flash |
|
| Sensor information |
| Sensor |
|
| Mono/Color |
|
| Sensor type |
|
| Shutter type |
|
| Resolution |
|
| Pixel size |
|
| Exposure time |
|
| Data quality (EMVA 1288 typical) |
| Dark noise |
|
| Saturation capacity |
|
| Dynamic range |
|
| Signal-to-noise ratio |
|
| Quantum efficiency |
- 45.9 % @ 465 nm
- 58.2 % @ 535 nm
- 53.8 % @ 630 nm
|
| Acquisition formats |
| Image formats, interface frame rate max. |
- Full Frame, 2448 × 2048 px, max. 73 fps
- Binning 2×2, 1224 × 1024 px, max. 76 fps
- Binning 2×1, 1224 × 2048 px, max. 76 fps
- Binning 1×2, 2448 × 1024 px, max. 76 fps
|
| Image formats, aquisition frame rate max. (Burst Mode) |
- Full Frame, 2448 × 2048 px, max. 77 fps
|
| Pixel formats |
- BayerRG8
- BayerRG10
- BayerRG12
- BayerRG12 Packed
- Mono8
- Mono10
- Mono12
- Mono12 Packed
- RGB8
- BGR8
|
| Image preprocessing |
| Analog controls |
- Gain (0 … 48 dB)
- Offset (0 … 255 LSB 12 Bit)
|
| Color models |
|
| Color processing |
- Integrated color processor for high quality color calculation
|
| Camera features |
| Auto Functions |
- Exposure Auto
- Gain Auto
- White Balance Auto
- Color Transformation Auto
|
| Image Pre-processing |
- Image Flipping (X/Y)
- Color Processing (RGB, BGR, Mono)
- Color Enhancement (with optimized ColorTransformationMatrix)
- LUT / Gamma
|
| Acquisition / Interface |
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Internal Image Buffer
|
| Synchronization |
|
| Trigger sources |
- Hardware
- Software
- ActionCommand
|
| Trigger delay |
- 0 … 2 sec, tracking and buffering of up to 256 trigger signals
|
| Process Synchronization |
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Additional Output Modes (e.g. Trigger Ready)
- PWM (PWM Duration / PWM Duty Cycle)
- 4 power outputs with up to 120 W (max. 48 V / 2.5 A)
- Selectable Output format (e.g. Tri State, Push Pull)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
|
| Additional Functions |
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
- Save Custom Data
|
| Internal image buffer |
- 445 MB
- 31 images (Trigger Mode)
- 1 image (Free Running Mode)
|
| Interfaces and connectors |
| Data interface |
|
| Process interface |
- M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
|
| Power supply |
|
| Mechanical data |
| Lens mount |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
|
| Material |
|
| Electrical data |
| Power consumption |
|
| Environmental conditions |
| Operating temperature |
- 0 … +60 ° @ T = measurement point
|
| Humidity |
- 10 … 90 % (non-condensing)
|
| Protection class |
- IP 65 (with mounted tube and cable)
- IP 67 (with mounted tube and cable)
|
| Digital I/Os |
| Lines |
- 1 input line
- 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
|
| Output line sources |
- Off
- Exposure Active
- Timer1
- Readout Active
- User0
- User1
- User2
- TriggerReady
|
| Conformity |
| Conformity |
|
