| informazioni sul sensore |
| Sensor |
|
| Mono/Color |
|
| Sensor type |
|
| Shutter type |
|
| Resolution |
|
| Pixel size |
|
| Exposure time |
|
|
| Dark noise |
|
| Saturation capacity |
|
| Dynamic range |
|
| Signal-to-noise ratio |
|
| Quantum efficiency |
- 46 % @ 465 nm
- 57,5 % @ 536 nm
- 53,8 % @ 631 nm
- 46,4 % @ 467 nm
- 58,7 % @ 533 nm
- 53,5 % @ 630 nm
|
| formati di acquisizione |
| Image formats, interface frame rate max. |
- Full Frame, 1440 × 1080 px, max. 79 fps
- Binning 2×2, 720 × 540 px, max. 120 fps
- Binning 2×1, 720 × 1080 px, max. 120 fps
- Binning 1×2, 720 × 540 px, max. 120 fps
|
| Image formats, aquisition frame rate max. (Burst Mode) |
- Full Frame, 1440 × 1080 px, max. 121 fps
|
| Pixel formats |
- BayerRG8
- BayerRG10
- BayerRG12
- BayerRG12 Packed
- Mono8
- Mono10
- Mono12
- Mono12 Packed
- RGB8
- BGR8
|
|
| Color models |
|
| caratteristiche della fotocamera |
| Basic Functions |
- Exposure
- Gain / Color Gain
- Trigger / Exposure Active (Flash)
- Binning 2x2
- Partial Scan
- Offset
- Free Running Mode (Live Image)
|
| Auto Functions |
- Exposure Auto
- Gain Auto
- White Balance Auto
- Color Transformation Auto
|
| Image Pre-processing |
- Image Flipping (X/Y)
- Color Processing (RGB, BGR, Mono)
- Color Enhancement (with optimized ColorTransformationMatrix)
- LUT / Gamma
|
| Acquisition / Interface |
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Internal Image Buffer
|
| Synchronization |
|
| Trigger sources |
- Hardware
- Software
- ActionCommand
|
| Trigger delay |
- 0 … 2 s, tracking and buffering of up to 256 trigger signals
|
| Process Synchronization |
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Additional Output Modes (e.g. Trigger Ready)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
|
| Additional Functions |
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
|
| Calibration data |
- Integrated color correction matrix (3000 K, 5000 K, 6500 K, 9500 K, and user defined)
- Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
- Customer data storage (128 bytes user defined)
|
| Internal image buffer |
- 36 MB
- 8 images (Trigger Mode)
- 1 image (Free Running Mode)
|
| Interfacce e connettori |
| Data interface |
- Gigabit Ethernet, Transfer rate 1000 Mbits/sec, Fast Ethernet, Transfer Rate 100 Mbits/sec, Connector: 8P8C Modular Jack (RJ45), screwable TYPE090 (according to GigE Vision Mechanical Supplement)
|
| Process interface |
- M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)
|
| Power supply |
- via M8/8 pins or Power over Ethernet (PoE)
|
| Dati meccanici |
| Lens mount |
|
| Width |
|
| Height |
|
| Depth |
|
| Weight |
|
| Material |
- zinc die casting, baked varnish
|
| Dati elettrici |
| Voltage supply range +Vs |
- 12 … 24 V DC (external power supply)
- 36 … 57 V DC (Power over Ethernet)
|
| Power consumption |
- Approx. 2.9 W @ 12 VDC and 79 fps
- Approx. 3.5 W @ 48 VDC (PoE) and 79 fps
|
|
| Flash memory size |
|
| Condizioni ambientali |
| Operating temperature |
- 0 … +65 ° @ T = measurement point
|
| Storage temperature |
|
| Humidity |
- 10 … 90 % (non-condensing)
|
| Protection class |
- IP 40 (with mounted lens and cable)
|
| I/O digitali |
| Lines |
- 1 input line
- 1 output line
- 2 general purpose lines
|
| Conformità |
| Conformity |
|
