| information du capteur |
| Sensor |
|
| Mono/Color |
|
| Sensor type |
|
| Shutter type |
|
| Résolution |
|
| Pixel size |
|
| Exposure time |
|
|
| Dark noise |
|
| Saturation capacity |
|
| Dynamic range |
|
| Signal-to-noise ratio |
|
| Quantum efficiency |
- 65,3 % @ 536 nm
- 63,6 % @ 533 nm
|
| formats d'acquisition |
| Image formats, interface frame rate max. |
- Full Frame, 1440 × 1080 px, max. 225 fps
- Binning 2×2, 720 × 540 px, max. 500 fps
- Binning 2×1, 720 × 1080 px, max. 225 fps
- Binning 1×2, 1440 × 540 px, max. 225 fps
|
| Image formats, aquisition frame rate max. (Burst Mode) |
- Full Frame, 1440 × 1080 px, max. 227 fps
|
| Pixel formats |
- Mono8
- Mono10
- Mono12
- Mono12 Packed
|
|
| Analog controls |
- Gain (0 … 48 dB)
- Offset (0 … 255 LSB 12 Bit)
|
| Color models |
|
| caractéristiques de l'appareil |
| Basic Functions |
- Exposure
- Trigger / Exposure Active (Flash)
- Binning 2x2
- Partial Scan
- Offset
- Free Running Mode (Live Image)
- Gain
|
| Auto Functions |
|
| Image Pre-processing |
- Image Flipping (X/Y)
- LUT / Gamma
|
| Acquisition / Interface |
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Internal Image Buffer
|
| Synchronisation |
|
| Trigger sources |
|
| Trigger delay |
- 0 … 2 s, tracking and buffering of up to 256 trigger signals
|
| Process Synchronization |
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Additional Output Modes (e.g. Trigger Ready)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
|
| Additional Functions |
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
|
| Calibration data |
- Camera calibration data (user defined storage for intrinsic / extrinsic camera parameters, and geometry distortion values)
- Customer data storage (128 bytes user defined)
|
| Internal image buffer |
- 428 MB
- 96 images (Trigger Mode)
- 1 image (Free Running Mode)
|
| Interfaces et connecteurs |
| Data interface |
- USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B
|
| Process interface |
- M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180)
|
| Power supply |
|
| Données mécaniques |
| Lens mount |
|
| Width |
|
| Height |
|
| Profondeur |
|
| Poids |
|
| Matériau |
- zinc die casting, baked varnish
|
| Données électriques |
| Puissance absorbée |
|
| Operating voltage |
- 5 VDC (via USB3.0 interface)
|
|
| Flash memory size |
|
| Conditions ambiantes |
| Operating temperature |
- 0 … +65 ° @ T = measurement point
|
| Température en magasin |
|
| Humidity |
- 10 … 90 % (non-condensing)
|
| Classe de protection |
- IP 40 (with mounted lens and cable)
|
| E/S numériques |
| Lines |
- 1 input line
- 1 output line
- 2 general purpose lines
|
| Conformité |
| Conformity |
|
