| information du capteur |
| Sensor |
|
| Mono/Color |
|
| Sensor type |
|
| Shutter type |
|
| Résolution |
|
| Pixel size |
|
| Exposure time |
|
|
| Dark noise |
|
| Saturation capacity |
|
| Dynamic range |
|
| Signal-to-noise ratio |
|
| Quantum efficiency |
- 61,1 % @ 536 nm
- 60,2 % @ 535 nm
|
| formats d'acquisition |
| Image formats, interface frame rate max. |
- Binning 2×2, 4672 × 3500 px, max. 11 fps
- Binning 2×1, 4672 × 7000 px, max. 11 fps
- Binning 1×2, 9344 × 3500 px, max. 11 fps
- Full Frame, 9344 × 7000 px, max. 9 fps
|
| Image formats, aquisition frame rate max. (Burst Mode) |
- Full Frame, 9344 × 7000 px, max. 11 fps
|
| Pixel formats |
- Mono8
- Mono10
- Mono12
- Mono12 Packed
|
|
| Analog controls |
- Gain (0 … 44 dB)
- Offset (-256 … 255 LSB 12 Bit)
|
| Color models |
|
| Image processing |
|
| caractéristiques de l'appareil |
| Basic Functions |
- Exposure
- Gain / Color Gain
- Trigger / Exposure Active (Flash)
- Binning 2x2
- Partial Scan
- Offset
- Free Running Mode (Live Image)
- Multi ROI
|
| Auto Functions |
|
| Image Pre-processing |
- Image Flipping (X/Y)
- LUT / Gamma
- Shading Correction
- Edge Sharpening
- Noise Reduction
- JPEG Image Compression
|
| Acquisition / Interface |
- Burst Mode
- Adjustable Framerate
- Short Exposure Time Enable
- Device Link Throughput Limit
- Internal Image Buffer
|
| Synchronisation |
|
| Trigger sources |
- Hardware
- Software
- ActionCommand
|
| Trigger delay |
- 0 … 2 sec, tracking and buffering of up to 256 trigger signals
|
| Process Synchronization |
- Events
- Timer
- Trigger Delay
- Debouncer
- Counter
- Sequencer
- Trigger via Action CMD (GigE)
- Action CMD Request ID
- Trigger ID inside Chunk
- Additional Output Modes (e.g. Trigger Ready)
- PWM (PWM Duration / PWM Duty Cycle)
- Selectable Output format (e.g. Tri State, Push Pull)
- Chunk data inside transferred image
- Encoder support via Counter End trigger source
- 4 power outputs with up to 120 W (max. 48 V / 2.5 A)
|
| Time synchronization IEEE 1588 |
- IEEE 1588 / Master and Slave function
- IEEE 1588 / Scheduled Action CMD
- IEEE 1588 / Synchronized Acquisition Framerate
|
| Additional Functions |
- User Set
- Integrated temperature sensor
- Readable additional information (e.g. sensor information)
- Save Custom Data
|
| Lens control |
|
| Internal image buffer |
- 1024 MB
- 15 images (Trigger Mode)
- 1 image (Free Running Mode)
|
| Interfaces et connecteurs |
| Data interface |
- 5 Gigabit Ethernet, Transfer rate 5000 Mbits/sec, 2.5 Gigabit Ethernet, Transfer rate 2500 Mbits/sec, Gigabit Ethernet, Transfer rate 1000 Mbits/sec, connector: SACC-CI-M12FS-8CON-L180-10G
|
| Process interface |
- M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180)
|
| Power supply |
|
| Données mécaniques |
| Lens mount |
- M58-mount (F-mount, M42, C-mount via adapter)
|
| Width |
|
| Height |
|
| Profondeur |
|
| Poids |
|
| Matériau |
|
| Données électriques |
| Plage de tension +Vs |
- 19,2 … 28,8 V DC (external power supply)
|
| Puissance absorbée |
- Approx. 10.1 W @ 24 VDC and 9 fps
|
|
| Flash memory size |
|
| Conditions ambiantes |
| Operating temperature |
- -30 … +70 °C @ T = measurement point
|
| Humidity |
- 10 … 90 % (non-condensing)
|
| Classe de protection |
- IP 40 (with mounted lens and cable)
|
| E/S numériques |
| Lines |
- 2 input lines
- 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A)
- RS232
|
| Conformité |
| Conformity |
- CE
- RoHS
- EAC
- UL recognized
|
