| General data |
| Resolution |
|
| Sensor type |
|
| Illumination |
- direct connection (integrated flash controller)
|
| Illumination connection |
|
| High-resolution mode |
- max. 12 inspections per second
|
| High-speed mode (limited resolution) |
- max. 25 inspections per second
|
| Number of jobs (products) |
|
| Features per job |
|
| Signal processing |
|
| Defect image memory |
|
| Lens |
|
| Electrical data |
| Voltage supply range +Vs |
|
| Power consumption |
- Typical 5 W (Imax = 1.5 A at 24 V)
|
| Digital inputs |
- 5 inputs (8 … 30 V)
- trigger
- job selection
- external teach-in
- encoders (CH-A, CH-B) 500 kHz
|
| Digital outputs |
- 5 outputs (PNP)
- Pass / Fail
- Flash Sync
- Alarm
- Camera Ready
- Output Enable
|
| Initial setup |
- Ethernet (10BASE-T / 100BASE-TX)
|
| Process interface |
|
| Visualization |
|
| Mechanical data |
| Width |
- 53 mm (without lens/tube)
|
| Height |
- 99.5 mm (without lens/tube)
|
| Depth |
- 49.8 mm (without lens/tube)
|
| Weight |
- ≤ 300 g (without lens/tube)
|
| Material |
- housing: aluminum
- cover glass: PMMA
|
| Environmental conditions |
| Operating temperature |
- +5 … +55 °C @ T = measurement point
|
| Storage temperature |
|
| Case temperature |
|
| Humidity |
- 0 … 90 % (non-condensing)
|
| Protection class |
|
| Vibration load |
- IEC 60068-2-6
- IEC 60068-2-64
|
| Mechanical shock resistance |
|
| Feature checks |
| Part location |
- Part location on contours
- Part location on edges
- Part location on circle
- Part location on text line
|
| Geometry |
- Distance
- circle
- angle
- count edges
- point position
- edge characteristics
|
| Feature comparison |
- count contour points
- contour comparison
- brightness
- contrast
- area size
- count areas
- pattern comparison
|
| Integrated flash controller |
| Voltage |
- 12 V DC or 24 V DC (permanent)
- 24 V DC or 48 V DC (pulsed)
|
| Current |
- Imax = 800 mA at 24 V DC (permanent) (±10 %, at least ± 100 mA, at 25 °C)
- Imax = 4 A at 48 V DC (pulsed) (+10/-20 %, at least ± 100 mA, at 25 °C)
|
| Flash time |
- max. 1 ms (Duty Cycle max. 1:10)
|
| Conformity |
| Conformity |
- CE
- RoHS
- KC (R-R-BkR-VeriSens-XC-IP)
|
| Non-volatile memory |
| Flash memory size |
- 256 Mbit Flash S29GL256P10FFI010
|
